Pag.: 36/60
Cod. 004770370
TC120
Función ANTICONGELANTE:
POMPA (Bomba)
Si la temperatura leída por la Sonda1, también en condicción de SPENTO (Apagado), se va debajo del Termostato
Anticongelante
A09 [4°C]
:
se activa la salida POMPA (Bomba) a intervalos de tiempo
se activa el indicador
L1, y la pantalla visualiza el mensaje
ICE
AUX
: si está habilitado el parametro instalador P02 = 1
Si la temperatura leída por la Sonda2 se va debajo del valor del Termostato Anticongelante
A09 [4°C]
:
se activa la salida AUX (6-7) a intervalos de tiempo
se activa el indicador
L3, y la pantalla visualiza el mensaje
ICE
Función ALARMA:
Si la temperatura leída por la Sonda supera el valor del Termostato de Alarma
A10
se activa sobre la pantalla la señal visual
SIC
se activa la señal acústica
Función
SILENCIO: la señal acústica se puede disactivar durante 5 minutos con la presión de una tecla
qualquiera; después de este tiempo, si la condicción de alarma permanece, la señal se activa otra vez.
Función TEST BOMBA
Por medio de una presión prolongada de la tecla
se activa la salida
POMPA (Bomba) por todo el tiempo de la presión del de la tecla;
se activa el indicador
L1, y la pantalla visualiza
tSt
.
Función TEST AUX
Por medio de una presión prolongada de la tecla
se activa la salida
AUX (6-7) por todo el tiempo de la presión del de la tecla;
se activa el indicador
L3, y la pantalla visualiza
tSt
.
6.3 INDICACIÓN DE AVERÍA O ALARMAS
El cuadro de control prevé la indicación de avería en las
sondas mediante mensajes intermitentes:
Lo : indica un fuera de escala hacia abajo (temperatura por debajo de -10 °C) Sonda interumpida o desconectada
Hi : indica un fuera de escala hacia arriba (temperatura por encima de 110 °C) Sonda en cortocircuito
En el caso de sondas 100K (viejo modelo) sobre cuadro de control TC120 y P01=0 se visualizarà el mensaje
Lo.
En el caso de sondas 10K (nuevo modelo) sobre cuadro de control TC200 se visualizzarà el mensaje
Hi o temperaturas
subidas de al menos 50 °C con respecto a la realidad.
Alimentación: 230 Vac
±
10% 50 Hz; Fusible de protección T 1,6A
Dimensiones mecanicas: Termorregulador de ensamble: 140 x 80 x 50 [mm]
Potencia absorbida: 2 VA
Normas aplicadas:
EN 60730-1 50081-1 EN 60730-1 A1
50081-2
Lista
5 - Caracteristicas tecnicas
En la óptica de un desarollo continuo de sus productos, el constructor se reserva el derecho de modificar las prestaciones y los datos tecnicos sin aviso previo. El
consumidor está garantizado en contra de las imperfecciones de conformidad del producto por 24 meses de la fecha de venta según la Directiva Europea 1999/44/F. Con
una solicitud se puede obtener del vendedor el texto completo de la fianza. La empresa no responde de daños producidos por conexiones equivocadas o uso impropio del
dispositivo.
7.0 SOSTITUCIÓN cuadro de mando TC200
En el caso se haya que reemplazar solamente el cuadro de mando (fig.4) y
NO las sondas presentes en la instalación,
•
Modificar el parámetro instalador
P01
(Pár.
3.5):
Cambiar el valor desde ’
0’ hasta
’1’
.
Haciendo esto, el nuevo cuadro de mando podrá administrar correctamente las sondas presentes.
Fig.4 -
Vista esterna TC200
MENU’
SERV.
POMPA
SERV.
AUX
TEMP.
OFF
ON