Palazzetti GLA810, User Manual

Page: 9 / 22

9
ENGLISH
6.2
FAN MENU
Through this Menu you can select the Fan speed.

Pressing the keys K3 and K4 it is possible to see and modify on the Display the speed currently selected for the Fan
(LED flashes).

MANUAL MODE : You can turn off the Fan by setting the speed P0 , or by selecting a speed from P1 (minimum speed)
to P10 (maximum speed).

AUTOMATIC MODE : You cannot turn off the Fan, you can select a speed from P1 (minimum speed) to P10
(maximum speed).

PROPORTIONAL MODE : it is not possible to switch off the Fan nor to set a speed, it is only possible to see the speed
selected by the temperature control unit.

Press the
K2
key to save the new value or wait 5 seconds.

Press the K1 key to exit without saving.
6.3
INSTALLER MENU
Access to this Menu is the RESPONSIBILITY of INSTALLATION TECHNICIANS or EXPERT PERSONNEL ,
because the parameters shown, if modified, may render the product is not suitable for the application in use.

To access the MENU
simultaneously
press the keys
K2
and
K4
for about 3 seconds.

To scroll through the parameters, use the keys K3 and K4

To view the value of the parameter and enter for modification, press the key K2

To change the value, press the keys K3 and K4

To save the new value, press the key K2 .

To exit without saving, press the key K1

Press the
K1
key again to exit from the Menu or wait 60 seconds
Description Code Min Set Max U.O.M.
Fan Activation Air Thermostat
E01
30
50
100 [°C]
SAFETY Air Thermostat E02 80 100 140 [°C]
ALARM Air Thermostat E03 100 130 180 [°C]
FAN SAFETY Air Thermostat E04 100 145 180 [°C]
Valve Opening Air Thermostat
E05
20
30
140 [°C]
Valve Closing Air Thermostat E06 20 80 140 [°C]
SERVICE output Fan Activation Air Thermostat E07 20 50 180 [°C]
Temperature Range for Proportional operation E50 20 45 100 [°C]
Fan Activation hysteresis thermostat
IE01
1
2
40 [°C]
SAFETY hysteresis thermostat IE02 1 2 40 [°C]
ALARM hysteresis thermostat IE03 1 2 40 [°C]
FAN SAFETY hysteresis thermostat IE04 1 2 40 [°C]
Opening Valve hysteresis thermostat
IE05
1
2
40 [°C]
Closing Valve hysteresis thermostat IE06 1 2 40 [°C]
SERVICE output Activation hysteresis thermostat IE07 1 2 40 [°C]
Room temperature hysteresis thermostat Ib01 0 1 20 [°C]
Fan Speed P01 (minimum)
UA01
0
30
100 [%]
Fan Speed P09 (ninth) UA09 0 70 100 [%]
Fan Speed P10 (maximum) UA10 0 100 100 [%]
Delay Time Damper Closing t 06 0 10 120 [min]
Time of suspension of Acoustic alarm
t 07
1
5
60 [min]
Time of Fan Starting t 08 0 0 10 [sec]
Input Configuration S2; 0 = not used; 1 = Probe; 2 = Thermostat P01 0 0 2 n
SERVICE Output Configuration P02 0 0 3 n
Enabling FAN SAFETY
P03
0
0
1 n
Enabling Air SAFETY P04 0 1 1 n
Enabling Air ALARM P05 0 1 1 n
Enabling Damper Start Function P12 0 0 1 n
Input Configuration S2; 1 = Probe; 2 = Thermostat
P17
1
1
2 n
NOTES: Modifying UA01 , UA09 , UA10 , the Fan immediately goes to the speed that you are calibrating in order to see the effect.
6.4 S1 INPUT CONFIGURATION ERROR
There may be two error conditions in the configuration of the product:
A. P17
= 1
st input Thermostat

When the fire is off it will display the writing
Lo

When the stove is on it shows
Hi
with the acoustic indicator in operation.
B.
P17 = 2
nd input
Probe NT100K
.

By powering the control unit,
Err
will appear on the display.