The part in contact with heat (from hearth up) have to be
assemble with glue Easy fix (included into Assembly kit
Palazzetti): This special glue is specific for outdoor and it is
resistant to heat, it become flexible and allow the expansion
of material due to heat of combustion.
- In the absence of Palazzetti Easy-fix glue, make sure that
the glue to be used has the following properties: single-
component polyurethane sealant.
Warning: if the fireplace comes in more elements, fit the grill
between the 2 side elements before fixing them. Wait for it to
harden before proceeding;
Place fireplace plates in hearth without fix;
Before using the barbecue, wait for it to dry completely (at
least 4 days);
Barbecues made of refractory concrete has
to be protected against bad weather by painting it with an
outdoor plastic quartz paint
(included into Assembly kit
Palazzetti).
Are necessary at least 2 hands, to obtain 2-3
mm thickness. All parts in Marmotech or already colored
in mixture have to be protected with water repellent
treatment Palazzetti
(included into Assembly kit Palazzetti);
Repeat them once a year.
Watch the following video for assembly instructions:
https://www.youtube.com/watch?v=Xx2zNA4kLCE
3.2 MARMOTECH OR ALREADY COLORED IN MIXTURE
BARBECUE
to
assemble the elements only use the special glue for
assembly by Palazzetti (included in some models). This
special glue becomes flexible when heating and can be used
to assembly all the elements of the barbecue.
- In the absence of Palazzetti Easy-fix glue, make sure that
the glue to be used has the following properties: single-
component polyurethane sealant.
Assemble the elements in order as shown on the assembly
drawing and check each step with a spirit level.
These kind
of models do not require any finishing, but it is necessary
to apply water-repellent treatment Palazzetti, which
protects structure against bad weather and cooking
grease
. (Included in some barbecues, to protect only
worktop).
Repeat it once a year.
Any imperfections you could find on Easy Stone parts have to
be considered a quality, because these parts are hand made
by expert manufacturer.
Watch the following video for assembly instructions:
https://www.youtube.com/watch?v=OV0OUqbaejY
IMPORTANT
:
- After completing assembly of barbecue, apply the included
warning adhesive as requested by current regulation UNI EN
1860-1 (included)
- Always light the barbecue with a moderate flame until it is
uniformly heated. - If it is heated too rapidly, some parts can
crack deeply and the structure could be damaged seriously.
- According to current regulations UNI EN 1860-1 some
cracks may appear but they do not affect the quality and the
functioning of the product, and could not be considered a
warranty claim, because they are the result of normal
expansion due to heat.
4 USE FORESEEN BY THE MANUFACTURER
The products described in this manual were specifically built
to cook food and to burn small pieces of well seasoned wood
or charcoal (see symbols on cutsight). Any other intended use
or any other type of fuel supply is to be considered improper
and therefore dangerous. This appliance was built in
compliance with technical standards and industry directives.
Do not exceed the allowable charge!
5 CLEANING AND MAINTENANCE
Before starting with cleaning, wait for the appliance
to cool down.
Clean the barbecue after each use: this makes it easier
to remove cooking residuals, preventing them from
burning the next time the oven is used.
- Always light the barbecue with a moderate flame until it
is uniformly heated. - If it is heated too rapidly, some
parts can crack deeply and the structure could be
damaged
seriously.
- According to current regulations UNI EN 1860-1 some
cracks may appear but they do not affect the quality and
the functioning of the product, and could not be
considered a warranty claim, because they are the result
of normal expansion due to heat;
- It is necessary to repeat once a year the quarz paint
coating - for unpainted barbecue- and water repellent
treatment – for barbecue colored in mixture or Marmotech
– in order to maintain it longer;
- We suggest you to cover the barbeque during colder
months with protective cover (optional), because ice can
damage the structure.
THIS BARBECUE COMPLIES WITH DIRECTIVE CEE 2004
CONCERNING THE GENERAL PRODUCT SAFETY,
PARTICULARLY AS REGARDS TO MATERIALS IN
CONTACT WITH FOODSTUFFS.
THE BARBECUES PALAZZETTI ARE COMPLAINT WITH
THE PROVISIONS OF INTERNATIONAL NORM UNI EN
1860-1.
6 SUGGESTIONS FOR BAKING
Light up the fire in the back part of the oven and keep the door
closed. Open the combustion air register of the oven’s door.
Heat the oven slowly. Burning a slow fire for the first time (2
kg. of small pieces and dry wood) to avoid thermal shocks
which could cause cracks in the structure.
The temperature of the oven depends on the fire lighted. In
any case it is necessary about 1 hour to reach the right
cooking temperature (about 250° C and baking room clearer
). The temperature is shown on the black scale of the
thermometer,
except on Capri 2 and Diva with oven which
is the red one
. The baking methods, the temperature and
times may vary in a widely, depending on the food. The
instructions given apply in general to the baking of pizza,
bread, cakes, etc….
As soon as the oven reaches a sufficient temperature and the
fire dies down, open the oven and quickly clean the floor by
pushing the residual embers and ashes to a corner. If the
