19
Palax D410 Pro+
Translation
1-2020
Bringing the conveyor into the transport position
1.
Lower the conveyor to the round, and connect the support bar B for the conveyor chain.
2.
Pull open the lock A and lift up the top of the conveyor.
3.
Ensure that the lock A locks properly.
4.
Raise the conveyor by means of the winch.
5.
Tighten the winch wire lightly to prevent it from uncoiling from the spool.
6.
Lock the conveyor to the transport support using the lock, the chain and the pin.
WARNING!
Always hold the winch handle when lowering the conveyor!
Using the firewood processor, description of operation
Transmission of the machine
The machine's all actuators – including the in-feed conveyor, the discharge conveyor and the
chain-saw – are equipped with hydraulic motors.
In a tractor-powered machine, the twin pump of the hydraulic system is driven via a gearbox
and a PTO shaft or by an electric motor.
Testing the safety-related devices of the machine
Visually, check that the machine looks undamaged, and does not leak oil.
Start the machine, and lift up the protective net for the splitting chute. The machine's all
functions shall now stop.
