50
The Reset page will allow you to factory reset the switch. Simply click
Reset System
and the switch will
then perform a factory reset.
SNMP
Simple Network Management Protocol (SNMP) is an OSI Layer 7 (Application Layer) designed
specifically for managing and monitoring network devices. SNMP enables network management
stations to read and modify the settings of gateways, routers, switches, and other network devices.
Use SNMP to configure system features for proper operation, monitor performance and detect
potential problems in the Switch, switch group or network.
Community
Community:
The SNMP community name. Its maximum length is 20 characters.
Access Right:
SNMP access mode
•
Read-Only:
Read only.
•
Read-Write:
Read and write.
Trap Event
Authentication Failure SNMP authentication failure trap, when community not match or user
authentication password not match.
Link Up/Down:
Port link up or down trap
Cold Start:
Device reboot configure by user trap
Warm Start:
Device reboot by power down trap
Notification
Server Address:
IP address or the hostname of the SNMP trap recipients.
Version:
Specify SNMP notification version
•
SNMPv1:
SNMP Version 1 notification.
•
SNMPv2:
SNMP Version 2 notification.