44
Priority:
Specify the STP path cost on the specified port.
Edge Port:
Specify the edge mode.
•
Enable:
Force to true state (as link to a host).
•
Disable:
Force to false state (as link to a bridge).
In the edge mode, the interface would be put into the Forwarding state immediately upon link up. If
the edge mode is enabled for the interface and there are BPDUs received on the interface, the loop
might be occurred in the short time before the STP state change.
P2P Port:
Specify the Point-to-Point operation mode.
•
Enable:
Force the true state (as link to an RSTP participating switch).
•
Disable:
Force to false state (as link to host).
•
Auto:
Automatically detect based on the duplex setting of the port.
Statistics page
The
Statistics
page displays STP information for each port.
Receive BPDU (Config):
The counts of the received CONFIG BPDU.
Receive BPDU (RSTP):
The counts of the received TCN BPDU.
Transmit BPDU (Config):
The counts of the transmitted CONFIG BPDU.
Transmit BPDU (TCN):
The counts of the transmitted TCN BPDU.