5
INTRODUCTION
The SX Series 8-port Smart Gigabit Switches provide 8
10/100/1000 Mbps auto-sensing RJ45 ports, 1
1000 Mbps Dedicated fiber port, and one Console port. They support IEEE 802.3af-compliant PDs
(15.4W) as well as IEEE802.3at-compliant PDs (30W). In addition, they support VLANs, QoS, IGMP
snooping, STP, RSTP, port mirroring, link aggregation and many other features. Aiming at solving the
safety problems in LAN, it provides user management classification, management VLAN, ARP attack
defense, worm attack defense, DoS attack defense, MAC attack defense, MAC filter and other safety
settings through visual WEB interface operations. With high performance and low cost, they are ideal for
residential and enterprise AV networks.
CUSTOMER SERVICE AND TECHNICAL SUPPORT
Pakedge Device & Software, Inc. is committed to providing you with exceptional support on all of our
products. If you wish to speak with one of our representatives, you may contact us at:
Customer Service
Email:
Phone:
650.385.8701
Technical Support
Email:
Phone:
650.385.8703
Website:
www.pakedge.com
Visit our website for up-to-date support information.
Please be prepared to provide your product's model and serial number when contacting Pakedge
Support. Your model and serial numbers are printed on a label located on the electronic housing.
Pakedge Device & Software, Inc.
3847 Breakwater Avenue
Hayward, CA 94545
USA
Installing
For installation procedures, please refer to the Quick Start Guide that came with the SX switch. You can
also visit the dealer portal on our website for all the current manuals and Quick Start Guides.
Note: If you install the switch in a closed or multi-unit rack assembly, the operating ambient
temperature of the rack environment may be greater than the room temperature. Make sure you install
the equipment somewhere within the recommended temperature range.
For free-standing installation, make sure that the switch has at least 1.5 in. (3.75cm) of clearance on
each side to allow for adequate air flow and cooling.