23
You can select multiple ports, and make the changes to the LACP timeout or port priority down below.
Click
Apply
to finalize the settings.
Static Aggregation
To configure a static link aggregation group, you must first select the
Aggregation Algorithm
. Once you
have selected the algorithm, click
Apply
.
Leave the following drop down menu as
New
and enter an
Aggregation group ID
. Set the Aggregation
Type to
Static
. Select the ports you want to be in the group, and click
Apply
.
Mirror
Port Mirroring allows you to copy packets on one or more ports to a mirroring destination port. You can
attach a monitoring device to the mirroring destination port to view details about the packets passing
through the copied port(s). This is useful for network monitoring and troubleshooting purposes. The
switch provides local port mirroring functionality, namely, both mirrored ports and mirroring destination
ports are located on the same device.
To configure port mirroring, select the
Destination Port
. The destination port is the port which all
mirrored data is sent to. You can select
Ingress
,
Egress
or
Egress & Ingress
for the
Sniffer mode
. Ingress
mode indicates that only data being received will be mirrored. Egress mode indicates that only data
being sent will be mirrored. Egress & ingress indicates that both directions of data are being mirrored to
the destination port.