7
CONNECT ING TO THE INT ERNET (CONT IN UED)
PPPoE:
To configure the router using a PPPoE connection, you will need to complete the
following steps:
A.
Determine the following information provided by the ISP:
i.
PPPoE username
ii.
PPPoE password
B.
Plug your PC into the router using an Ethernet cable.
C.
Open any internet browser on the PC and go to http://192.168.1.99.
D.
Log in to the router using
pakedge / pakedgef
as the username and password.
E.
Navigate to
System -> Network
on the left-hand side of the screen and select
Interface
.
F.
Next, click on
wan1
. You should see its configuration page.
G.
Click on the
PPPoE
radio button under the
Addressing Mode
heading.
H.
Enter the username and password information provided by the ISP. Hit
OK
at the
bottom of the screen.
I.
The router is now configured and ready for use. You can now access the internet.