26
2.
Set the
Distance
field to 5. Click
OK
.
3.
If wan1 is using a static IP, navigate to
Router
->
Static
->
Static Routes
. Double-click on the static
route that you created.
4.
Set the distance field to 5. Click
OK
.
5.
If wan2 does not use DHCP, skip to step 7. If wan2 uses DHCP, navigate back to
System
-
>
Network
->
interfaces
. Double click on
wan2
.
6.
Set the
distance
field to 10. Click
OK
.
7.
If wan2 is set to a static IP, navigate to
Router
->
Static
->
Static Routes
. Double-click on the static
route that you created to get internet access for this wan port.
8.
Set the
distance
field to 10. Click
OK
.