SETUP
The device has been provided with a SETUP-function. This function
permits the user himself to determine his individual initial parameters
for the percutaneous and invasive applications.
Adjustable stimulation pulse width
The stimulation pulse width can be adjusted fast and simple with a button of
its own in a number of steps – with intervals ranging from 0.05 ms, 0.1 ms,
0.2 ms, 0.3 ms, 0.5 ms to 1.0 ms, e.g. for the selective stimulation of sensory
and motor nerve fibres in mixed nerves.
Easy to view – simple in application
The MultiStim SENSOR
PEG- and Cannula button*
Pressing the PEG- or Cannula button will cause the stimulation to be
switched to the handle or to the cannula, as may be required.
The respectively active electrode will thereby be indicated by means of a
corresponding status indicator in the display. The intensity and the
frequency of the stimulation current, as well as the pulse width can be
adjusted separately for both outputs. This button will remain without
function if no PEG-handle has been connected.
* only if the optional PEG-cable and electrode are used
Nominal/actual stimulation current intensity
The intensity of the stimulation current actually flowing through the patient
is measured constantly, and is indicated numerically as well as by bar graph
indicator on the display. The nominal and actual currents are also constantly
compared and indicated visually or acoustically, if the intensity of the
actually flowing current differs from the adjusted current intensity.
ON/OFF
PAUSE
The stimulation can be interrupted at any time with the PAUSE - button.
The settings of all stimulation parameters can be changed without emitting
impulses, while the device remains attached to the patient.
Pulse width
Pulse frequency
Pulse width
