22
10)
Folding Rollers & Rubber roller replacement
10.1)
Remove the White gear from the side as well as the black gear on the back side
10.2)
After removing the bearing on the front side, push down the main rubber roller and
take the roller out through the large hole as shown in the picture below. Follow the
same method in placing the new roller.
11)
Solid State Relay
11.1)
Remove operator side of main cover
11.2)
Remove the circled four screws indicated
in the picture on the right
11.3)
Remove the four wires attached to relay
Note: Please write down the order in which
they are attached
11.4)
Remove Relay
11.5)
Reinstall in reverse order
Pressure Sealer ES-5000
