PageFlip Lite User Guide
4.6
Setting Up the Book Clamp
4.6
Setting Up the Book Clamp
PageFlip Lite is designed to operate with books having a wide
range of sizes and thicknesses. This is made possible with the
use of our specially-designed clamp that can mount a book to the
unit while firmly restraining pages from inadvertently turning.
The clamp consists of a back support and two spring-loaded
arms, as shown in Fig. 7(a). Each arm has a tip that includes a
page restraint to block loose pages from turning freely. Each tip
also includes a peg that slides into a rear slot on the PageFlip Lite
to secure the book clamp into place. Before setting up the book
clamp, it must first be detached from PageFlip Lite by pulling it out
of the two rear slots.
A book is attached to PageFlip Lite by securing the book clamp
to the bottom edge of an open book. This is done by pulling the
page restraints away from the supporting plate (Fig. 7(b)). An open
book is slid into the space between the flexed arms and the sup-
porting plate. Release the arms, allowing the compressive force
of the springs to secure the book between the page restraints and
the supporting plate (Fig. 7(c)).
Pick up the clamped book and slide the clamp pegs into the
rear slots on PageFlip Lite, as shown in the bottom row of Fig. 7.
PageFlip, Inc.
15
www.pageflip.com
Summary of Contents for Lite
Page 1: ...PageFlip Lite Automatic Page Turner User Guide...
Page 2: ......
