PageFlip Lite User Guide
9. FREQUENTLY ASKED QUESTIONS
Why do pages not lie flat once they are loaded in the arms?
Depending on the thickness of the book, the stiffness of the spine,
and the type of paper, the sheets may not sit flat. Try to condition
the book before reading by pressing the pages open to loosen the
spine before attaching the book clamp.
The pages are still not flat. What can be done to improve this?
The force that the clamp applies to one end of the book to help
keep it open may cause pages to bulge on the opposite end. If
necessary, attach a second clamp on the opposite end of the book
to balance the restraining forces. You may use any standard clip for
the opposite side to help balance the force and flatten the pages.
Does PageFlip Lite work with looseleaf binders?
Yes, PageFlip Lite can turn loose pages that are inserted in a thin
looseleaf binder. Use looseleafs with 1 inch binding rings to hold
up to 275 sheets. The rotary movement of the forked arms as they
pass the center permits them to swing past the looseleaf binder
rings without incident. However, the large release tabs used to
open the binder rings will interfere with the movement of the forked
arms. Therefore, only use looseleafs that have
one
release tab
and attach the book clamp to the side without the release tab.
Why do my external Jellybean switches not trigger the unit?
Be sure to use the correct Y-adapter. Each Jellybean switch uses
a 1/8"
mono
plug, whereas the PageFlip Lite has an outlet for a
1/8"
stereo
plug. Therefore, only a 1/8" stereo male to a dual 1/8"
mono female Y-adapter will work.
PageFlip, Inc.
30
www.pageflip.com
Summary of Contents for Lite
Page 1: ...PageFlip Lite Automatic Page Turner User Guide...
Page 2: ......
