PageFlip Lite User Guide
9. FREQUENTLY ASKED QUESTIONS
9
FREQUENTLY ASKED QUESTIONS
Why are the LEDs not lit when I turn on the unit or pedal?
Make sure to install four fresh AA batteries in the page turner and
three AA batteries in the pedal. The PageFlip Lite may be plugged
into the wall using the supplied univeral AC adapter. Do not use
any other adapter as that may damage the unit.
Why is the LED blinking and how do I stop it?
The blinking LED indicates that PageFlip Lite is on but not yet
paired with the wireless pedal. You must turn on the wireless pedal
to proceed with the pairing process to make the LED stop blinking.
The LED will remain on even if you turn off the pedal.
Why did PageFlip Lite automatically shut down?
PageFlip Lite and the wireless pedal automatically shut down after
30 minutes of inactivity. The page turner may also shut down if an
error occurs during a page-turn cycle. Restart the page turner and
pedal by moving the power switch from ON to OFF and back to ON.
Does PageFlip Lite turn pages at timed intervals?
No. PageFlip Lite turns a page only when the user triggers it by
pressing a button, tapping a pedal, or activating an external switch.
Why does the wireless pedal not trigger PageFlip Lite?
Turn off both units to reset their wireless connection. Then, turn
on the PageFlip Lite and observe that the LED blinks slowly. Next,
turn on the pedal and observe that both sets of LEDs flash for three
seconds and then remain on to signal that pairing is now complete.
PageFlip, Inc.
28
www.pageflip.com
Summary of Contents for Lite
Page 1: ...PageFlip Lite Automatic Page Turner User Guide...
Page 2: ......
