background image

4

SAFETY

SECTION 1

1.1

This manual contains important safety and operating instructions. Please read
these fully and note all warnings before using the charger. Please follow all
instructions and retain this manual for future reference.

1.2

This charger is not intended for any use other than the charging of batteries
as detailed in Section 2, Specification, Range of Batteries Charged.

1.3

IMPORTANT: Use only on AC supplies 100-265V, 50/60Hz. Supply connection
to the unit should be made using only the standard lead supplied with this
equipment.

1.4

Protect the power cord from being walked on or pinched, particularly at plugs.
Unplug this apparatus during lightning storms or when unused for long
periods of time.

1.5

Ensure that the ventilation slots are not obstructed when in use, e.g. do not
site the charger on a carpet, and ensure that nothing covers the charger
when it is in use.

1.6

WARNING: Indoor use only. To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.

1.7

Although the charger is short circuit protected, extreme care should always
be taken not to short circuit the battery itself. Rechargeable batteries can
deliver power at a very high rate, and short circuiting even a partially
charged battery could result in a fire or personal injury.

1.8

WARNING: This appliance must be earthed.

1.9

Users who are not qualified electronics technicians must not attempt to
disassemble the charger. There are no user-serviceable parts inside, and
incorrect reassembly may result in a safety hazard.

1.10

Do not use the apparatus if it has been damaged in any way, such as the
supply cord or plug is damaged, liquid has been spilled, the apparatus has
been exposed to rain or moisture, does not operate normally, or has been
dropped. In this event you should seek advice from your nearest PAG Dealer,
or direct from PAG Ltd., London, by telep44 (0)20 8543 3131.

Summary of Contents for PAGlink pl16+













Reviews: