6
2.4
PAGlink Charging:
Up to eight PAGlink batteries per channel may be charged. Batteries can be
in any state of charge. The most-discharged batteries will be given a higher
charge priority. Fully-charged batteries will stop accepting charge auto-
matically and independently of other batteries. Batteries may be left on
the charger when fully-charged and will be automatically maintained in a
ready-for-use condition.
2.5
Recovery Charge Program:
The charger will automatically recover a battery that has become over-
discharged. Additionally, the charger will automatically recover a Li-Ion
battery where the output has been shut down.
2.6
Self Test Program:
The internal microcomputer constantly monitors the battery under charge, as
well as the operation of the charger’s own functions, which will be shut down
to a safe condition should any of the tests fail.
2.7
Mains Input:
100V to 265V AC. Frequency 50-60 Hz. Maximum consumption 220W.
2.8
Output Protection:
Charger protected against short circuit and excess battery voltage.
2.9
AC Mains Failure Protection:
Should mains failure occur during a charging program, or whilst the charger
is connected, it will shut down to a safe condition.
2.10
User Interface:
The charge status of each PAGlink battery is indicated by its own display.
The different stages of the charging process are indicated for each channel
on the charger’s LCD screen. The charger is fully automatic in operation.
2.11
Safety:
Designed to comply with electrical safety standard BS EN 60065 and UL6500.
NOTE: UK AC power leads are fitted with a 1" fuse to BS1362 rated 5A as
standard.
2.12
European Union Directives:
Complies with the following EU Directives:
EMC Directive 89/336/EU.
Low Voltage Directive 73/23/EU.
2.13
Operating Temperature Range:
0ºC to +40ºC (+32ºF to +104ºF).
Summary of Contents for PAGlink pl16+
Page 1: ...Instruction Manual PL16 CHARGER JAN 2016 ...
Page 2: ......
