O P E R A T I O N
PAGE 5-16
T6M SERIES MOBILE SERVICE MANUAL – SM/16/1.0
transmitting.
The transmit LED lights whilst the mobile is transmitting. If there is a transmitter
problem then the mobile stops transmitting and the red LED is extinguished. Note
that transmit fault codes are not displayed in test mode.
To switch off without saving the new setting, press and release the power key. The
display then shows “nS” and the speaker sounds a single, long tone.
To save the new setting, press and hold the power button. With the power button
depressed, press PRI, then SCN, then SQL. When the new setting is saved, the
display shows “S” and the speaker sounds two short pips. If the key sequence is
incorrect then the display shows “nS” and the speaker sounds a single, longer tone to
indicate that the new setting has not been saved.
