O P E R A T I O N
T6M SERIES MOBILE SERVICE MANUAL – SM/16/1.0
PAGE 5-11
You may want to store a short
Personality description
in the mobile. For example,
if you save your mobile’s personality as a file, then it might be useful to put the file
name here.
On the
Frequencies
page, you will see a single default entry. If you want your
mobile to be able to operate on the default frequency shown, than leave the
frequency value as it is, otherwise alter it to a frequency that you do require.
Enter frequencies in ICAO format, which specifies both the operating frequency and
bandwidth. There is no need to enter a bandwidth as the programmer determines
the bandwidth from the entered frequency.
If you want the frequency to be included in the list of priority frequencies then enter
Yes
in the
Priority
column. You need only press
Y
or
N
. Up to 15 frequencies may
be marked as priority frequencies.
If you want the frequency to be a member of a scan group then enter the scan group
number in the scan group column. If you want the frequency to be in more than one
scan group then separate the scan group numbers with commas.
There are 15 scan groups, numbered 1 to 15. You may put up to 15 frequencies in
each group.
The
Tx Inhibit
column determines when a mobile may transmit. If inhibit is set to
Never
, by entering
N
in this column, then transmit is always allowed. This allows you
to transmit on this frequency even if it is busy.
