O P E R A T I O N
T6M SERIES MOBILE SERVICE MANUAL – SM/16/1.0
PAGE 5-5
If Pause mode is programmed then the mobile remains on channel for 6 seconds then
resumes scanning automatically. You can override this, making the mobile hold, by pressing
the CH
é
button or the microphone PTT button before scanning resumes. To stop holding,
and resume scanning, press CH
é
once more.
Scan mode is selected by pressing the SCN button. Once in scan mode a scan group is
selected using the SEL
é
and SEL
ê
keys. During scanning the display shows “
the number of the current scan group.
Scan mode is cancelled by:
•
Pressing the SCN button to go to normal mode.
•
Pressing the PRI button to go to priority mode.
If the mobile is holding or paused on a channel then pressing the PTT allows you to transmit,
unless there is a transmit fault or transmission is inhibited. See sections 5.3 & 5.7 for more
information on transmit inhibit and transmit faults.
Display blanking is not operative in scan mode.
Channels may be locked out of the current scan group by pressing the CH
ê
button whilst
the mobile is paused or holding on the channel to be locked out. This lock out is temporary;
all locked out channels are reinstated when scan mode is cancelled.
Squelch is automatically enabled when scan mode is selected.
Channels may be programmed into more than one scan group.
Scan and priority modes are mutually exclusive.
