PACOM RDRH-EL104, User Manual

Page: 48 / 82

User’s Manual
40
Highlight the desired box under the
PTZ
heading, and press the button. A list of PTZ presets
appear. Select the preset position for each PTZ camera, where you want PTZ cameras to move
to whenever the DVR detects an input on the associated alarm input.
Motion
Detection
Highlight
Motion Detection
in the Event menu and press the button. The
Motion Detection
setup screen appears.
You can define the area of the image where you want to detect motion; e.g., a doorway. Highlight the
box under the
Zone heading, and press the button. The Motion Detection Zone screen displays.
You can toggle the entire list On and Off by highlighting Notification
and pressing the button. You can toggle the individual items On
and Off by highlighting that item and pressing the button. Highlight
OK
and press the button to accept your changes.
NOTE: For the Notify action, the notify item you select should
be enabled in the Notification setup screen and the DVR should
be registered in the RAS (Remote Administration System).
Figure 43 Motion Detection Settings setup screen.
Your DVR has built-in video motion detection.
Video motion detection can be turned On or
Off for each camera.
Highlighting the box under the Sensitivity heading and pressing the
button allows you to adjust the DVR’s sensitivity to motion for
Daytime and Nighttime independently. There are five settings with
1
being the least sensitive and
5
being the most sensitive.