PACOM PNVR32-RMT User Manual Download Page 35

Page: 35 / 160

Network Video Recorder

NOTE:

In this document, a “site” refers to a device group, layout or sequence registered on the administration

service.

User

The User menu allows you to register and manage users or user groups.

①

Group Panel

: Displays a user group list. The

Administrators

group has authority to perform all functions,

and the authority settings cannot be edited.

②

User List Panel

: Displays the list and information about users registered in each group.

③

(Incremental Search): Allows you to search for a user registered in each group. Selecting

a group in the

Group

Panel and entering text that you want to search for causes the search results to be

displayed. Search results are displayed immediately as matching text is found within the selected group.
As you enter more text, the results narrow.

④

(Add), (Remove),

(Edit): Allow you to add, remove and edit a user group or user.

Recording Schedule

The Recording Schedule menu allows you to set up the schedule for recording.

Summary of Contents for PNVR32-RMT

































































































































































Search results

Summary of Contents for PNVR32-RMT

Reviews:

Related manuals for PNVR32-RMT

Brands by name

Popular brands

PACOM PNVR32-RMT, User Manual

Search results

Summary of Contents for PNVR32-RMT

Reviews:

Related manuals for PNVR32-RMT

Brands by name

Popular brands