PACOM PNVR32-RMT, User Manual, Page: 21 / 160

Network Video Recorder
13
Email
Enter the SMTP server information. The NVR system
can send an email to preset Client users when an event
is detected or to specific recipients when any services
are disconnected from the administration service.
 SMTP Server , Port : Enter the email address and port
number of the SMTP server. Select Use SSL/TLS if
the SMTP server requires SSL (Secure Sockets Layer)
authentication.
 Use Authentication : Select and enter the ID and
password if the SMTP server requires user
authentication.
 Sender : Enter the sender’s email address.
 Email Test : Click the button to test if the SMTP server
information is correct.
 Notification service connection : Sends an email
to the recipients below when any services are
disconnected from the administration service. Clicking
the button at the bottom allows you to enter email
addresses of the recipients.
2.3 Registering Devices
You must register devices on the administration service and add the devices to a device group in order to
perform any operation.
Run the
SiRiS Setup program.
1.
Select the Device menu.
2.
Click All Devices in the Site panel, and then the button at the bottom of the Site List panel. The
Device Scan window appears.