PACOM 8-Channel, User Manual

Page: 65 / 84

Digital Video Recorder
57
NOTE: It is possible that no recorded image displays on the current screen. Press the
DISPLAY
button and
change the screen mode to 4x4. You will be able to easily see the camera have recorded video during
target time.
You can also narrow your event search by selecting the
Option…
button and setting up the new search condition.
You can search video from the first to last recorded images,
or you can set the start and stop times and dates.
Highlight the box beside
From
and press the button to
toggle between On and Off. When set to Off, you can enter a
specific Date and Time. When set to On, the search will be from
the first recorded image. When highlighting and pressing
the
button the bookmark list displays and the bookmark
point you selected will be the starting date and time.
Highlight the box beside
To
and press the button to toggle between On and Off. When set to Off, you can enter a
specific Date and Time. When set to On, the search will be from the last recorded image. When highlighting and
pressing the
button the bookmark list displays and the bookmark point you selected will be the ending date and time.
Highlight the box beside
Check Time Overlap
and press the button. It toggles between On and Off. You will only
be able to turn the Check Time Overlap on or off if a user-defined date and time is set to From and To. If the DVR’s
date and time have been reset, it is possible for the DVR to have more than one overlapping start and stop time. When
set to On, you will be asked to select one of the overlapping start and stop time. When set to Off, the DVR will display
search results from all start times to all stop times.
Highlight the box beside
Alarm-In
and press the button. You can select the alarm inputs that you want to include
in your search.
Highlight the box beside
Motion
and press the button. You can select the cameras for which you want any reports
of motion detection.
Highlight the box beside
Video Loss
and press the button. You can select the cameras for which you want any
reports of lost video.
Highlight the box beside
Video Blind
and press the button. You can select the cameras for which you want any
reports of blind video.
Highlight the box beside
Text-In
and press the button. You can select the text-in devices which you want any reports
of text input.
Highlight the box beside
Record Channels
and press the button. You can select the cameras that you want to search
for any reports of event recorded data. The DVR will display the events (not the camera channels) that occurred and
that also are recorded on the camera channel that you selected. If you do not select a camera channel in this field, the
DVR will search events that are not associated with cameras.
You can also toggle On and Off self-diagnostic System Events as part of your search. The choices are:

Panic Record

Check Recording

Check Alarm-In

Disk Almost Full

Disk Bad

Disk Temperature

Disk S.M.A.R.T.

Fan Error

Disk Config Change
Once you set your desired search conditions, highlight
Search
and press the button to display the search results in
the
Event Log Search
screen. Selecting
Cancel
exits the screen without saving the changes.