PACOM 8-Channel, User Manual

Page: 38 / 84

User’s Manual
30
Figure 35 — Main Monitor screen.
Highlight the box beside
Mode
and press the button. You
can select between Full Sequence and Cameo Sequence.
Pressing the
SEQUENCE
button causes the DVR to sequence
cameras, and the DVR can sequence cameras in two modes:
“Full” and “Cameo”. In the Full mode, the DVR sequences
through the cameras and displays them full screen. In the
Cameo mode, the bottom right window in a multi-screen
format sequences through the cameras.
NOTE: Any cameras that are Off, have lost video or are set
to Covert (unless the user has authority to view
covert cameras) will be excluded from the Cameo
sequence.
You can define the screen layout in a variety of formats and set the DVR to sequence through the different screen layouts
(pages) so that all the cameras will be displayed. You can also set up the DVR to display one camera or a group of
cameras all the time while cycling through the remaining cameras in a “cameo” window. This can be done with one
camera displayed full screen while displaying the cameo window as a PIP (picture in picture), or displaying the cameras
in a grid pattern with the bottom right window as the cameo.
NOTE: Sequence cannot be used in the 4x4 display mode of the 16-channel, and 3x3 mode of the 8-channel DVR.
You can adjust the display dwell time by highlighting the box beside
Interval
and pressing the button. You can
select dwell intervals ranging from 1 second to 1 minute.
Highlight
Event Monitoring On
and press the button. Pressing the button toggles between
On
and
Off
. When
it is
On
, the DVR will display the camera associated with the event when an event occurs.
Highlight the
Spot Monitor
tab to switch to the Spot Monitor screen.
You can define which cameras display sequentially on the
Spot Monitor. Highlight the box in the
Channels
column
and press the button.
Figure 36 — Spot Monitor screen.
Highlight the
VGA
tab to switch to the VGA screen.