PACOM 8-Channel, User Manual

Page: 31 / 84

Digital Video Recorder
23
NOTE: You will need to get the appropriate IP Address, Gateway and Subnet Mask from your network
administrator.
Highlight the box beside
DNS Server
. Press the
Up
and
Down
arrow buttons to set the IP address of the DNS server.
Highlight
Use UPnP
and press the button to toggle between On and Off. When it is On, port forwarding from the
NAT (Network Address Translation) device to the DVR will be enabled automatically via UPnP (Universal Plug and
Play) service. This function will be especially useful when accessing a port on a private IP address.
NOTE: For the UPnP service to work, the NAT device should support the UPnP Port Forwarding function and
the function should be set to enabled.
You cannot change the port settings when Use UPnP is On.
Highlight the
Status
box and press the button to display the port numbers forwarded from the NAT device via UPnP
service.
Highlight the
Port Number Setup…
box and press the button. The
Port Number Setup
screen appears.
NOTE: You will need to get the appropriate Port Numbers for each RAS and WebGuard related program (Admin,
Callback, Watch, Search and Audio) from your network administrator.
Change the numbers by highlighting them and using the
Up
and
Down
arrow
buttons to increase or decrease the number. The factory default Port settings are:
Remote Admin: 8200
Remote Callback: 8201
Remote Watch: 8016
Remote Search: 10019
Remote Audio: 8116
NOTE: The system restarts automatically after changing the port settings.
Do NOT use the same port number for two different programs, otherwise, the DVR cannot be connected
with the PC running RAS or WebGuard.
CAUTION: When changing the port settings, you must change the port settings on the PC running
RAS as well. Refer to the RAS manual for details.
Selecting
DHCP
from the Type and highlighting
Save
button
reads the current IP address of the DVR configured by DHCP
(Dynamic Host Configuration Protocol) network.
Highlight
Auto
and press the button to toggle between On
and Off. When it is On, the DVR will obtain the IP address of
the DNS server automatically.
NOTE: Selecting Auto will only be enabled when the DVR
is configured for DHCP network.
Selecting
ADSL (with PPPoE)
allows you to set up the ADSL
network.
Highlight the box beside
ID
and press the button. A
virtual keyboard appears allowing you to enter the ID for
ADSL connection.
Highlight the box beside
Password
and press the button.
A virtual keyboard appears allowing you to enter the password
for ADSL connection.