manualshive.com logo in svg

PACOM 4-CHANNEL, User Manual

Share
Download
PACOM 4-CHANNEL User Manual Download Page 76

User’s Manual 

66 

 : After selecting 

ENTER/PAUSE

, press the down-arrow button to review to the previous image. 

 

NOTE:  Entering Fast/Backward Playback mode from Live Monitoring mode can be password 
protected.

 

 

Enter Button 

 

Pressing the 

ENTER/PAUSE

 button will pause the video on the screen.  The screen displays  . 

 

Camera Buttons (1 to 4) 

 

Pressing a camera button will display that camera full screen. 

 

QUAD/SEQ Button 

 

When playing back video, you can change the display format from full screen to quad (2x2) mode 
by pressing the 

QUAD/SEQ

 button.  However, changing the display format from quad (2x2) to full 

screen is not available.   

 

Shuttle Ring 

 
The Shuttle Ring functions in the Playback mode.  The Shuttle Ring is spring loaded and returns to 
the center position when released.  Turning the ring clockwise plays video forward.  Turning the 
ring counterclockwise plays video backward.  Playback speed varies with the amount the ring is 
turned.  The playback speeds are  x0.5, 

, 

, 

,  x0.5,  , 

, 

 and 

. 

 
When you release the ring, it snaps back to the center position and the video pauses. 
 

Jog Dial 

 
The Jog Dial functions when playback video has been paused.  By turning the jog dial clockwise, 
you can play video forward image-by-image.  By turning the jog dial counterclockwise, you play 
video backward image-by-image.

 

 

NOTE:  When playing recorded video at maximum speed with very high image quality, 
playback of recorded audio may be interrupted occasionally. 

 

NOTE:  The user cannot change the system setup from a remote site during Playback mode. 

 

Digital Zoom Playback Mode 

 
You can enter the Digital Zoom Playback mode by pressing the 

PTZ

 button in the Playback mode.  

Once you press the 

PTZ

 button in the playback mode, the image pauses and a bright small box is 

laid over the image.  This box indicates the area to be enlarged.

  

Move the position of the box using 

the arrow buttons, and press the   button to enlarge that area.  The enlarged screen displays  .  
Pressing the 

PTZ

 button again releases the Digital Zoom Playback mode and returns to the 

playback mode.

 

 

NOTE:  You cannot enter the Digital Zoom Playback mode when the selected camera is set to 
Covert and not played back. 

Summary of Contents for 4-CHANNEL





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands