PACOM 4-CHANNEL, User Manual

Page: 67 / 92

Four-Channel Digital Video Recorder
57
To change the password, highlight the
Password
box and press the button. A window appears
asking you to enter the current password. If you enter the correct password, another window
appears asking you to enter a new password using the camera buttons. After you press the
button, another screen appears asking you to confirm the new password.
NOTE: The Admin and User passwords are composed of up to eight digits using the camera
buttons. The default Admin password is
4321 .
CAUTION: Write down the new password and save it in a secure place. If the
password is forgotten, the unit must be reset using the
Factory Reset Button and
all data settings will be lost.
To lock front panel buttons, highlight
Key Lock On and press the button. Once the buttons are
locked, pressing any front panel button will cause a password screen to display. You will need to
enter the correct password to unlock the keys. The Key Lock password is
4321 . The Administrator
password also can be used to unlock the keys.
You can save your changes by highlighting
OK
and pressing button. Selecting
Cancel
exits the
screen without saving the changes.
Config Screen
The
Config menu is used to perform functions such as switching between Quick Setup and Normal
Setup, backing up video, loading default setup and clearing all data.
Figure 74 — Config screen.
Clip Copy
The
Clip Copy
screen can be used to back up video to an internal CD-RW drive, external USB hard
disk drive, USB CD-RW drive or USB flash drive. The backup clip images can be viewed on
computers running Microsoft Windows 98, ME, 2000 or XP. Refer to the
Appendix A — USB Hard
Disk Drive Preparation for information on preparing the external drive for back up.