User’s Manual
56
When an event occurs, the DVR will dial the pager and leave a four- or five-digit number. The first
three digits are the site ID number and the last digits are the type of event (1: Alarm In, 2: Text-In,
3: Motion Detection, 4: Video Loss, 10: Check Recording, 11: Storage, 13: S.M.A.R.T, and 18:
System). For example, “0754” means that Site 75 has lost video.
NOTE: The DVR will wait for at least four minutes between pages. If another event occurs
less than four minute after the DVR has notified a pager, it will not dial the pager. It does this
so that the telephone line will not be tied up.
You can save your changes by highlighting
OK
and pressing the button. Selecting
Cancel
exits
the screen without saving the changes.
Password Setup Screen
An Administrator password is required to turn the system off, enter the setup screen, load default
setups, clear all data, change system date and time and change the Administrator password. A User
password is required to enter playback, fast forward playback and fast backward playback modes
from live monitoring mode, and enter the search menu screen in live monitoring mode. Highlight
Password
in the Main menu and press to enter the
Password
screen.
Figure 73 — Password setup screen.
Highlight the box beside
User
and press the button to toggle between
On
and
Off
. If the
password is set to
On
, you will be asked to enter the current password so that you can turn it Off. If
the password is set to
Off
, you will be asked to enter the new password and to confirm it before it
will be turned on.
The Administrator password cannot be turned On and Off. You can change the Administrator
password by first entering the current password, entering a new password and finally confirming
the new password.
Summary of Contents for 4-CHANNEL
