Packard Bell EasyNote LJ75 Service Manual Download

Page: 35 / 222

Chapter 1

Audio Interface

Power and Keyboard Controller

Item

Specification

Audio
Controller

Realtek ALC272 Azalia Codec and Amplifier G1454

•

Features

•

HD Audio

•

SNR > 85,High-performance DACs with 95dB SNR (A-Weighting), ADCs with
85dB SNR (A-Weighting)

•

Internal Digital Microphone

•

Two speakers, max. 1W output for each

•

Meets performance and function requirements for Microsoft WLP 3.10, and stricter
performance requirements for future WLP

•

Two stereo DAC support 16/20/24-bit PCM for two independent playback (multiple
streaming)

•

Two stereo ADC supports 16/20/24-bit PCM format for two independent recording

•

All DACs support independent 44.1k/48k/96k/192kHz sample rate

•

All ADCs support independent 44.1k/48k/96k/192kHz sample rate

•

Two independent SPDIF outputs support 16/20/24-bit format and 44.1k/48k/88.2k/
96k/192kHz rate

•

All analog jack ports except MONO, BEEP-IN and HP-OUT are stereo input and
output re-tasking

•

Supports line level mono output

•

Supports analog PCBEEP input, and features an integrated digital BEEP
generator

•

Support two stereo digital microphone input for microphone array AEC/BF
application

•

Each stereo digital microphone interface has its own clock output to support
independent sample rate

•

Supports legacy analog mixer architecture

•

Built-in five headphone amplifiers on port-A and port-D, port-E, port-F and port-I.

•

Headphone amplifier on port-I (HP-OUT) is designed to drive output without
external DC blocking capacitors

•

Software selectable 2.5V and 3.2V reference output for microphone bias

•

Software selectable boost gain (+10/+20/+30dB) for analog microphone input

•

Two jack detection pins; each supports detection of up to 4 jacks

•

Supports two GPIO (General Purpose Input/Output) pins (pin sharing with digital
microphone interface)

•

Supports EAPD (External Amplifier Power Down) control for external amplifier

•

Supports anti-pop mode when analog power AVDD is on and digital power is off

•

Supports 1.5V~3.3V scalable I/O for HD Audio link

•

48-pin LQFP ‘Green’ package

Item

Specification

Controller

KB926

Total number of keypads

99-/100-/103

Windows logo key

Yes

Internal & external keyboard
work simultaneously

Yes

Features

Support Application keys for Windows XP version

All manuals and user guides at all-guides.com

Summary of Contents for Bell EasyNote LJ75































































































































































































































Search results

Summary of Contents for Bell EasyNote LJ75

Reviews:

Related manuals for Bell EasyNote LJ75

Brands by name

Popular brands

Packard Bell EasyNote LJ75, Service Manual

Search results

Summary of Contents for Bell EasyNote LJ75

Reviews:

Related manuals for Bell EasyNote LJ75

Brands by name

Popular brands