Packard Bell EasyNote LJ75 Service Manual Download

Page: 12 / 222

Chapter 1

•

Dual independent display support

•

16.7 million colors

•

External resolution / refresh rates*:

•

VGA port up to 2048 x 1536: 85 Hz

•

HDMI™ port up to 1920 x 1200: 60 Hz

•

MPEG-2/DVD decodingVC-1 and H.264 (AVC) decodingMicrosoft® DirectX Video Acceleration
(DXVA) application interface (API)

•

HDMI™(High-Definition Multimedia Interface) with HDCP (High-bandwidth Digital Content
Protection) support

Storage subsystem*

•

One or two 160/250/320/500/640 GB or larger hard disk drives

•

Multi-in-1 card reader, supporting:

•

Secure Digital™ (SD) Card, MultiMediaCard (MMC), Memory Stick™ (MS), Memory Stick
PRO™ (MS PRO), xD-Picture Card™ (xD)

Optical Drive*

•

4X Blu-ray Disc™/DVD-Super Multi double-layer drive:

•

Read: 24X CD-ROM, 24X CD-R, 24X CD-RW, 8X DVD-ROM, 8X DVD-R, 8X DVD+R, 8X
DVD-ROM DL, 6X DVD-R DL, 6X DVD+R DL, 8X DVD-RW, 8X DVD+RW, 5X DVD-RAM, 4X
BD-ROM, 4X BD-R, 2X BD-RE, 4X BD-ROM DL, 4X BD-R DL, 2X BD-RE DL

•

Write: 24X CD-R, 16X CD-RW, 8X DVD-R, 8X DVD+R, 6X DVD-RW, 6X DVD+RW, 5X DVD-
RAM, 4X DVD+R DL, 4X DVD-R DL

•

8X DVD Super Multi double-layer drive:

•

Read: 24X CD-ROM, 24X CD-R, 24X CD-RW, 8X DVD-ROM, 8X DVD-R, 8X DVD+R, 6X
DVD-ROM DL, 6X DVD-R DL, 6X DVD+R DL, 6X DVD-RW, 6X DVD+RW, 5X DVD-RAM

•

Write: 24X CD-R, 16X CD-RW, 8X DVD-R, 8X DVD+R, 4X DVD-R DL, 4X DVD+R DL, 6X
DVD-RW, 8X DVD+RW, 5X DVD-RAM

Audio

•

Two built-in stereo speakers

•

High-definition audio support

•

S/PDIF (Sony/Philips Digital Interface) support for digital speakers

•

Built-in microphone

•

MS-Sound compatible

Dimensions and Weight

•

372 (W) x 259 (D) x 26/37 (H) mm (14.66 x 10.19 x 1.02/1.46 inches)

•

2.65 kg (5.84 lbs.) with 6-cell battery

Communication

•

Video conferencing solution, featuring:

•

Webcam with 640 x 480 resolution

•

WLAN*:

All manuals and user guides at all-guides.com

Summary of Contents for Bell EasyNote LJ75































































































































































































































Search results

Summary of Contents for Bell EasyNote LJ75

Reviews:

Related manuals for Bell EasyNote LJ75

Brands by name

Popular brands

Packard Bell EasyNote LJ75, Service Manual

Search results

Summary of Contents for Bell EasyNote LJ75

Reviews:

Related manuals for Bell EasyNote LJ75

Brands by name

Popular brands