background image

14 

Notice 

 
The information in this guide is subject to change without notice. 
 
This guide contains information protected by copyright. No part of this guide may be photocopied or 
reproduced in any form or by any means without prior written consent from NEC Computers International 
BV. 
 
 
NEC COMPUTERS INTERNATIONAL BV SHALL NOT BE LIABLE FOR TECHNICAL OR EDITORIAL 
ERRORS OR OMISSIONS CONTAINED HEREIN; NOR FOR INCIDENTAL OR CONSEQUENTIAL 
DAMAGES RESULTING FROM THE FURNISHING, PERFORMANCE, OR USE OF THIS MATERIAL. 
 
 
Copyright © 2002 NEC Computers International BV. All rights reserved. 
 
Packard Bell is a trademark of NEC Computers International BV. 
The names of actual companies and products mentioned herein may be trademarks and/or registered 
trademarks of their respective owners. 
 
 
The software described in this guide is furnished under a license agreement or nondisclosure agreement. 
The software may be used or copied only in accordance with the terms of the agreement. 
 
 

Stella (iXtreme) Disassembly Manual 

Author: Juan M. Calviño Alonso 
First Edition: December 2002 
Document Part Number: REFDOCS02420200 
Version: 1.1 
 
Packard Bell 
A division of NEC Computers International BV 
 
 

Packard Bell Stella (iXtreme) Disassembly Manual 

Summary of Contents for Stella
















Reviews: