Packard Bell ENTK81 Series Service Manual Download Page 57

Page: 57 / 240

Chapter 3

Machine Disassembly and Replacement

IMPORTANT:

The outside housing and color may vary from the mass produced model.

This chapter contains step-by-step procedures on how to disassemble the notebook computer for
maintenance and troubleshooting.

Disassembly Requirements

To disassemble the computer, you need the following tools:

•

Wrist grounding strap and conductive mat for preventing electrostatic discharge

•

Flat screwdriver

•

Philips screwdriver

•

Plastic flat screwdriver

•

Plastic tweezers

NOTE:

The screws for the different components vary in size. During the disassembly process, group the
screws with the corresponding components to avoid mismatch when putting back the components.

Chapter 3

Summary of Contents for ENTK81 Series

















































































































































































































































Search results

Summary of Contents for ENTK81 Series

Reviews:

Packard Bell ENTK81 Series, Service Manual, Page: 57 / 240

Search results

Summary of Contents for ENTK81 Series

Reviews: