manualshive.com logo in svg

Packard Bell ENTK81 Series, Service Manual, Page: 163 / 240

Share
Download
Packard Bell ENTK81 Series Service Manual Download Page 163

Chapter 4

153

No Display Issue

If the 

Display

 doesn’t work, perform the following actions one at a time to correct the problem. Do not replace 

a non-defective FRUs:

No POST or Video

If the POST or video doesn’t display, perform the following actions one at a time to correct the problem.

1.

Make sure that the internal display is selected. On this notebook model, switching between the internal 
display and the external display is done by pressing 

Fn+F5

. Reference Product pages for specific model 

procedures.

2.

Make sure the computer has power by checking at least one of the following occurs:

•

Fans start up 

•

Status LEDs light up

If there is no power, see “Power On Issue” on page 152.

3.

Drain any stored power by removing the power cable and battery and holding down the power button for 
10 seconds. Reconnect the power and reboot the computer.

4.

Connect an external monitor to the computer and switch between the internal display and the external 
display is by pressing 

Fn+F5

 (on this model). 

If the POST or video appears on the external display, see “LCD Failure” on page 155.

5.

Disconnect power and all external devices including port replicators or docking stations. Remove any 
memory cards and CD/DVD discs. Restart the computer.

If the computer boots correctly, add the devices one by one until the failure point is discovered.

6.

Reseat the memory modules.

7.

Remove the drives (see “Disassembly Process” on page 49).

8.

If the Issue is still not resolved, see “Online Support Information” on page 207.

Summary of Contents for ENTK81 Series

















































































































































































































































Reviews:

No comments