manualshive.com logo in svg

Packard Bell ENTK81 Series, Service Manual, Page: 47 / 240

Share
Download
Packard Bell ENTK81 Series Service Manual Download Page 47

Chapter 2

37

BIOS Flash Utilities

The BIOS flash memory update is required for the following conditions:

•

New versions of system programs

•

New features or options

•

Restore a BIOS when it becomes corrupted. 

Use the flash utility to update the system BIOS flash ROM.

NOTE: 

If you do not have a crisis recovery diskette at hand, then you should create a 

Crisis Recovery 

Diskette

 before you use the flash utility.

NOTE: 

Do not install memory-related drivers (XMS, EMS, DPMI) when you use the flash.

NOTE: 

Please use the AC adaptor power supply when you run the flash utility. If the battery pack does not 

contain enough power to finish BIOS flash, you may not boot the system because the BIOS is not 
completely loaded. 

Follow the steps below to run the flash.

1.

Prepare a bootable diskette.

2.

Copy the flash utilities to the bootable diskette.

3.

Then boot the system from the bootable diskette. The flash utility has auto-execution function.

Summary of Contents for ENTK81 Series

















































































































































































































































Reviews:

No comments