manualshive.com logo in svg

Packard Bell ENTK81 Series, Service Manual, Page: 21 / 240

Share
Download
Packard Bell ENTK81 Series Service Manual Download Page 21

Chapter 1

11

Bottom View

Indicators

The computer has several easy-to-read status indicators. The front panel indicators are visible even when the 
computer cover is closed.

No.

Icon

Item

Description

1

Battery bay

Houses the computer's battery pack.

2

Battery release 
latch

Releases the battery for removal.

3

Hard disk bay

Houses the computer's hard disk (secured

with screws).

4

Memory 
compartment

Houses the computer's main memory.

5

Battery lock

Locks the battery in position.

6

Ventilation slots 
and cooling fan

Enable the computer to stay cool, even after 
prolonged use.

Note

: Do not cover or obstruct the fan opening.

Icon

Function

Description

Power

Indicates the computer's power status.

Battery

Indicates the computer's battery status.

NOTE:

 1. 

Charging:

 The light shows amber when 

the battery is charging. 2.

 Fully charged:

 The light 

shows green when in AC mode.

HDD

Indicates when the hard disk drive is active.

Communication indicator

Indicates the computer’s wireless connectivity 
device status.

1

2

3

4

5

6

Summary of Contents for ENTK81 Series

















































































































































































































































Reviews:

No comments