manualshive.com logo in svg

Packard Bell ENTK36 Series, Service Manual, Page: 172 / 210

Share
Download
Packard Bell ENTK36 Series Service Manual Download Page 172

162

Chapter 5

BIOS Recovery by Crisis Disk

BIOS Recovery Boot Block:

BIOS Recovery Boot Block is a special block of BIOS. It is used to boot up the system with minimum BIOS 
initialization. Users can enable this feature to restore the BIOS firmware to a successful one once the previous 
BIOS flashing process failed.

BIOS Recovery Hotkey:

The system provides a function hotkey: 

Fn+Esc

, for enable BIOS Recovery process when system is powered 

on during BIOS POST. To use this function, it is strongly recommended to have the AC adapter and Battery 
present. If this function is enabled, the system will force the BIOS to enter a special BIOS block, called Boot 
Block.

Steps for BIOS Recovery from USB Storage:

Before doing this, prepare the Crisis USB key. The Crisis USB key could be made by executing the Crisis Disk 
program in another system with Windows XP OS.

Follow the steps below:

1.

Format the USB storage disk using the Fast Format option. 

2.

Save ROM file (file name: 

NEW70x64.fd

) to the root directory of USB storage. Make sure that there is no other 

BIOS file saved in the same directory.

3.

Plug USB storage into USB port.

4.

Press 

Fn + ESC

 button then plug in AC power.

The Power button flashes once.

5.

Press 

Power

 button to initiate system CRISIS mode.

When CRISIS is complete, the system auto restarts with a workable BIOS. 

6.

Update the latest version BIOS for this machine by regular BIOS flashing process.

Summary of Contents for ENTK36 Series



















































































































































































































Reviews:

No comments