Packard Bell EasyNote DT85, Service Manual

Page: 136 / 208

CHAPTER 3: Replacing notebook components
130
Replacing the webcam
Tools you need to complete this task:
Screws removed during this task:
•
2 black M2.5×8 (LCD panel hinges - bottom)
•
2 black M2.5×8 (LCD panel hinges - top)
•
13 M2.5×8 black (palm rest
- base side)
•
3 black M2.5×8 (palm rest - top side)
To replace the webcam:
1
Complete the steps in “Preparing the notebook” on page 51 .
2
If the notebook has a wireless card installed, follow step 1 to step 4 in
“Replacing the wireless card” on page 58 .
3
Remove the keyboard by following the instructions in “Replacing the
keyboard” on page 77 .
4
Remove the keyboard cover by following the instructions in “Replacing the
keyboard cover” on page 79 .
5
Remove the LCD panel assembly by following the instructions in “Replacing
the LCD panel assembly” on page 83 .
6
Remove the LCD front panel by following step 6 to step 8 in “Replacing the
LCD front panel” on page 116.
7
Carefully pry loose the webcam from the LCD panel assembly lid.
8
Tape the new webcam to the LCD panel assembly lid by using a double-sided
adhesive tape.
Flat-blade driver Scribe or non-marring tool - OR -
Phillips #0 screwdriver