Packard Bell EasyNote DT85 Service Manual Download Page 25

Page: 25 / 208

www.packardbell.com

Left View

Icon

Item

Description

DC-in jack

Connects to an AC adapter.

HDMI out jack
(optional)

HDMI

Plug an HDMI device, such as a high definition television, into
this optional jack.

External display
(VGA) port

Connects to a display device (e.g., external monitor, LCD
projector).

Ethernet (RJ-45)
port

Connects to an Ethernet 10/100/1000-based network.

USB 2.0 ports

Connects to USB 2.0 devices
(e.g., USB mouse, USB camera).

Line-in jack

Accepts inputs from external sound source.

Microphone jack

Accepts inputs from external microphones.

Headphones/spe
aker/line-out jack.

Connects to audio line-out devices
(e.g., speakers, headphones).

ExpressCard/54
slot

Accepts one ExpressCard/54 module.

Note:

Push to remove/install the card.

Summary of Contents for EasyNote DT85

















































































































































































































Search results

Summary of Contents for EasyNote DT85

Reviews:

Related manuals for EasyNote DT85

Brands by name

Popular brands

Packard Bell EasyNote DT85, Service Manual

Search results

Summary of Contents for EasyNote DT85

Reviews:

Related manuals for EasyNote DT85

Brands by name

Popular brands