manualshive.com logo in svg

Pacific Microsonics Two HDCD, User Manual, Page: 59 / 74

Share
Download
Pacific Microsonics Two HDCD User Manual Download Page 59

®

I N C .

P A C I F I C

M I C R O S O N I C S

59

Reference

Model Two HDCD

®

 User’s Manual

Rev. C - January 2002

format, button #3 (2_WIRE) selects two wire, single speed AES as the digital input format.
Pressing ENTER activates the selection.

Recall Presets Menu

The Recall Presets Menu is reached from the Operating Menu by selecting
(SETUP/PRESETS).

The Rotary Control is used to scroll through the stored presets. A brief description of the
highlighted preset is displayed on the menu. For example, the description for the AD1X-24
preset is “FIXED: ANALOG to 1X HDCD24“. Function button #1 (RECALL) selects the high-
lighted preset. When a preset is selected, the following message is displayed: “Recall this
preset? Press ENTER to recall, or any other key to cancel”. Pressing ENTER configures the
system with the preset’s contents.

Note: All System Menu settings (Front Panel Display, Analog Polarity and DAC-System
Optimize) and Meter Setup Menu settings are not changed during preset loading. 

Caution:

selecting a different preset may change the Monitor Level setting!

System Menu

The System Menu is reached from the Operating Menu by selecting
(SETUP/MORE.../SYSTEM).

Function button #1 (PANEL) selects the Front Panel Display Menu. Button #3 (POLARTY)
selects the Analog Polarity Menu. Button #5 (DAC_OPT) selects the DAC-System Optimize
Menu. Descriptions of these Menus are on pages 60 and 61.

Summary of Contents for Two HDCD











































































Reviews:

No comments