manualshive.com logo in svg

Pacific Microsonics Two HDCD, User Manual, Page: 52 / 74

Share
Download
Pacific Microsonics Two HDCD User Manual Download Page 52

®

I N C .

P A C I F I C

M I C R O S O N I C S

52

Reference

Model Two HDCD

®

 User’s Manual

Rev. C - January 2002

Digital Output Format Menu

In 88.2 kHz (2_X) digital output operating modes, the Digital Output Format Menu is
reached from the Operating Menu by selecting (SETUP/OUTPUT/FORMAT).

Function button #1 (1_WIRE) selects single wire, double speed AES as the digital output
format, button #3 (2_WIRE) selects two wire, single speed AES as the digital output
format. Pressing ENTER activates the selection.

Analog Input Menu

In all AD modes, the Analog Input Menu is reached from the Operating Menu by selecting
(SETUP/INPUT). This menu appears in different forms depending on whether 1_X, 2_X or
4_X AD operating modes are selected.

In 44.1 kHz (1_X) AD operating mode:

The A/D REF clock mode is displayed on the top right of the menu and is set using the
Reference Clock Menu, selected by function button #1 (REFCLK). Button #2 (AD_MODE)
selects the A/D Filter Mode Menu, button #3 (HDCDBIT) selects the Monitor Input HDCD
Code Detect Menu, button #4 (MON_REF) selects the Monitor Reference Clock Menu. De-
scriptions of these menus are on pages 53 and 54.

In 88.2 kHz (2_X) AD operating mode:

Summary of Contents for Two HDCD











































































Reviews:

No comments