manualshive.com logo in svg

Pacific Microsonics Two HDCD, User Manual, Page: 17 / 74

Share
Download
Pacific Microsonics Two HDCD User Manual Download Page 17

®

I N C .

P A C I F I C

M I C R O S O N I C S

17

Setup & Operation

Model Two HDCD

®

 User’s Manual

Rev. C - January 2002

Graphic Display 

The back lit Graphic Display has 7 lines of text with 40 characters per line. The display
shows the current system operational, setup, and selection menus. Menu display formats
are described in detail in the Reference section, page 39. Display contrast and brightness
are adjustable using the Front Panel Display Menu. From the Operating Menu select (SETUP/
MORE.../SYSTEM/PANEL).

Menu Up and Down Buttons

These buttons are used to navigate up and down through the menu selections on the
Graphic Display. Press “UP” once to move up to the previously displayed menu or “DOWN”
to move down to the next menu in the current selection path. Pressing and holding “UP”
will step up through each previously displayed menu until the top level Operating Menu is
reached.

Function Buttons

The five Function Buttons are used to select menu options shown on the Graphic Display.
Each function button selects the menu item located directly above it on the display. Active
menu items are displayed in

      reverse

while selected items are

     

outlined

In some cases, a function button will operate as a toggle, selecting between multiple
choices displayed above it on the Graphic Display.

Enter Button

The Enter Button is used to activate selected (outlined) items on the Graphic Display. Once
active, the item is displayed in reverse.

Rotary Control 

The Rotary Control is used to make changes to the values of selected (outlined) items on
the Graphic Display. Changes to values become active immediately and may be canceled by
pressing UNDO or saved by pressing ENTER. If the Levels Menu is exited with the Rotary
Control active, it will remain active. Turning the Rotary Control one step in either direction
will recall the Levels Menu with the Control still functioning.

Summary of Contents for Two HDCD











































































Reviews:

No comments