14
PACIFIC FP30 190712-28
FIG. #12
Chimney
Roof fl ashing
Storm collar
* 4" diameter combustion outside air inlet. One on either
side of unit. A 4" outside air inlet is also on the left side of
the unit for outside fan air. The combustion air inlets can
be rotated to draw air from the rear of the unit if desired.
Spark arrestor
rain cap
Radiation shield
Chimney Support
38.5" (978mm)
Minimum distance
from unit to ceiling
Minimum 7' (2.1m)
Ceiling Height
Non-combustible
fl oor protector
The chimney may incorporate
an offset. To do this safely, all
sections of listed connector,
offset elbows and chimney
section must be screwed
together by at least three
sheet metal screws per joint.
The chimney must be suitably
supported by the chimney
manufacturer's listed offset
support. NOTE: Maximum
unsupported chimney height
is 25 feet(7.62m)
Summary of Contents for PACIFIC FP30
Page 26: ...26 PACIFIC FP30 190712 28...
