PACIFIC FP30 190712-28
21
Cement Board Installation
The front facing area of the FP30 must be covered with non-
combustible cement board as shown in Fig.#24 and #25 prior
to applying any fi nishing material.
The cement board can be attached to the framing and to the
front of the unit outside of the dimensioned area shown by
the dotted line in Fig.#24.
Use the manufactures suggested fasteners to attach the ce-
ment board and install as recommended.
Tape and mud the joints as per the board manufacturers
recommendations.
Facing and Air Inlet
FACING FLANGES
FACING FLANGES
1 1/2”
1”
1”
3/4”
FIG. #24
60.00
MIN
36.00
MIN
NON-COMBUSTIBLE CEMENT BOARD
REQUIRED
30in2 (194cm2)
CHASE AIR INLET
1 1/2”
ALTERNATE LOCATION
FOR CHASE AIR INLET
DECORATIVE
NON-COMBUSTIBLE
FACING MAXIMUM
4” THICK
FIG. #25
Summary of Contents for PACIFIC FP30
Page 26: ...26 PACIFIC FP30 190712 28...
