12
OWNER’S
INFORMATION
Continuous Pilot/Intermittent Pilot (CPI/IPI) selection
With the system in "OFF" position press the Mode Key (Fig. 1) to index to the CPI mode icon (fig.
13 & 14).
Pressing the Up Arrow Key will activate the Continous Pilot Ignition mode (CPI). Pressing the
Down Arrow Key will return to IPI. A single “beep” will confirm the reception of the command.
NOTE: this function is available only with Proflame IFC.
NOTE: If the system is equipped with a CPI/IPI toggle switch:
• Set the CPI/IPI switch to CPI position(switch closed) to enable remote CPI/IPI
operation.
• Set the CPI/IPI switch to IPI position (switch open) to disable remote CPI/IPI
operation. The system will now work in IPI mode only regardless of the selection on
the remote control hand set.
Figure 13
Figure 14
Remote dimmer control (Light)
The dimmer function controls the Light power outlet by power light control. To activate this
function use the Mode Key (Fig. 1) to index to the Light icon (Fig. 15 & 16).
The intensity of the output can be adjusted through six (6) levels. Use the Up/Down Arrow Keys
(Fig.1) to adjust the output level
. A single “beep” will confirm reception of the command.
Note. This function is available only with the Proflame IFC
.
Figure 15
Figure 16
Summary of Contents for G963
Page 14: ...14 OWNER S INFORMATION DIMENSIONAL DRAWINGS Fig 19 PROFLAME Transmitter dimensional drawing ...
Page 16: ...16 OWNER S INFORMATION Lighting Instructions ...
Page 17: ...17 INSTALLER INFORMATION G963 Fireplace Dimensions Figure 20 Fireplace dimensions ...
