Page
39
of
67
Figure 19: Sample Profile Development Screen
2) Profile parameters can be changed while the profile is running.
Perform the following procedure to modify profile parameters while
the profile is running:
a) On the TF 2000, press the “Select” button until the cursor is at
the parameter field to be changed.
b) Press the “UP” or “DOWN” buttons to change the selected field.
Numeric values change by increments of 2 for each press of the
“UP” or “DOWN” button. See Figure 20.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
