Page
27
of
67
6-2
Optics Tab Alignment View
This screen is used for aligning the component solder balls to the PCB
land pattern using the vision overlay system (VOS). Camera Zoom
and Focus can be controlled from this screen as well as the Real Time
Split Screen feature.
Figure 14: Optics Tab Alignment View
Zone 1: The lower left-hand corner and the upper right-hand
corner up to the diagonal lines marked “1”.
Zone 2: The lower left-hand corner and the upper right-hand
corner up to the diagonal lines marked “2”.
**
Refer to Figure 15 for an example of Real Time Split Screen
images.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
