System Operations Manual
www.paceworldwide.com
Page 7 of 40
5. Set-Up
a. Connect
i. The TF 1500 comes configured for internal or external air. Select air
source; internal pump or external N
2
. (Figure 2a & 2b)
Warning
: Do not run unit in N
2
mode unless N
2
supply is connected and
on.
1. Open rear panel.
2. Turn key to desired air supply.
3. Close rear panel.
Figure
2a
Figure
2b
ii. Insert PC into brackets on back of PC.
iii. Monitor
4. Connect power cord.
5. Connect video cable to the 9-pin connector of the PC.
iv. Keyboard – connect cable to computer.
v. Mouse – connect cable to computer.
vi. Connect cables between PC and back of TF 1500 according to labels.
vii. Connect power cords to TF 1500 and PC.
b. Start
up
i. Turn on circuit breaker on back of unit.
ii. Turn on power switch on front of unit.
iii. Turn on computer.
iv. Turn on monitor.
v. Mouse click on TF 1500 icon.
vi. Read and accept license.
N
2
Key
N
2
Connection
