PACE
│
Installation & Assembly Manual
Issue Date: 07/03/2018
2
Form PA102.20-N1
This equipment is a relatively complicated apparatus.
During rigging, installation, operation, maintenance, or
service, individuals may be exposed to certain compo-
nents or conditions including, but not limited to: heavy
objects, refrigerants, materials under pressure, rotat-
ing components, and both high and low voltage. Each
of these items has the potential, if misused or handled
improperly, to cause bodily injury or death. It is the ob-
ligation and responsibility of rigging, installation, and
operating/service personnel to identify and recognize
these inherent hazards, protect themselves, and pro-
ceed safely in completing their tasks. Failure to comply
with any of these requirements could result in serious
damage to the equipment and the property in which it
IMPORTANT!
READ BEFORE PROCEEDING!
GENERAL SAFETY GUIDELINES
is situated, as well as severe personal injury or death
to themselves and people at the site.
This document is intended for use by owner-authorized
rigging, installation, and operating/service personnel. It
is expected that these individuals possess independent
training that will enable them to perform their assigned
tasks properly and safely. It is essential that, prior to
performing any task on this equipment, this individual
shall have read and understood the on-prooduct labels,
this document, and any referenced materials. This in-
dividual shall also be familiar with and comply with all
applicable industry and governmental standards and
regulations pertaining to the task in question.
SAFETY SYMBOLS
The following symbols are used in this document to alert the reader to specific situations:
Indicates a possible hazardous situa-
tion which will result in death or serious
injury if proper care is not taken.
Indicates a potentially hazardous situa-
tion which will result in possible injuries
or damage to equipment if proper care
is not taken.
Identifies a hazard which could lead
to damage to the machine, damage to
other equipment and/or environmental
pollution if proper care is not taken or
instructions and are not followed.
Highlights additional information useful
to the technician in completing the work
being performed properly.
External wiring, unless specified as an optional connection in the manufacturer’s product line,
is not to be connected inside the control cabinet. Devices such as relays, switches, transduc-
ers and controls and any external wiring must not be installed inside the micro panel. All wir-
ing must be in accordance with PACE's published specifications and must be performed only
by a qualified electrician. PACE will NOT be responsible for damage/problems resulting from
improper connections to the controls or application of improper control signals. Failure to fol-
low this warning will void the manufacturer’s warranty and cause serious damage to property
or personal injury.
