background image

©

2012 PACE Incorporated, Southern Pines, NC All Rights Reserved. Printed in the USA 

www.paceworldwide.com

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

PACE WORLDWIDE LIMITED WARRANTY STATEMENT 
 
Limited Warranty 

 
Seller warrants to the first user that products manufactured by it and supplied hereunder are free of defects in 
materials and workmanship for a period of one (1) year from the date of receipt by such user.  This Warranty 
as applied to blowers, motor pumps, x-ray tubes, lenses, optical/lighting probes and cameras is limited to a 
period of one (1) year.  Monitors, computers and other brand equipment supplied but not manufactured by 
PACE are covered under their respective manufacturer’s warranty in lieu of this Warranty.   
 
This warranty does not cover wear and tear under normal use, repair or replacement required as a result of 
misuse, improper application, mishandling or improper storage.  Consumable items such as tips, heaters, 
filters, etc. which wear out under normal use are excluded.  Failure to perform recommended routine 
maintenance, alterations or repairs made other than in accordance with Seller’s directions, or removal or 
alteration of identification markings in any way will void this warranty. This warranty is available only to the first 
user, but the exclusions and limitations herein apply to all persons and entities. 
 
SELLER MAKES NO OTHER WARRANTY, EXPRESS OR IMPLIED, AND MAKES NO WARRANTY OF 
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. 
 
Seller will, at its option, repair or replace any defective products at its facility or other location approved by it at 
no charge to user, or provide parts without charge for installation by the user in the field at user’s expense and 
risk.  User will be responsible for all costs of shipping equipment to Seller or other location for warranty 
service. 
 
EXCEPT FOR THE REMEDY ABOVE DESCRIBED, UNLESS OTHERWISE REQUIRED BY APPLICABLE 
LAW, SELLER WILL HAVE NO OTHER OBLIGATION WITH REGARD TO ANY BREACH OF WARRANTY 
OR OTHER CLAIM WITH RESPECT TO THE PRODUCTS, OR LIABILITY FOR ANY DIRECT, INDIRECT, 
CONSEQUENTIAL, OR INCIDENTAL LOSS OR DAMAGE CAUSED BY OR OCCURRING IN CONNECTION 
WITH ANY OF THE PRODUCTS. 
 
Warranty service may be obtained by contacting the appropriate PACE Company or local Authorized PACE 
distributor as set forth below to determine if return of any item is required, or if repairs can be made by the 
user in the field.  Any warranty or other claim with respect to the products must be made with sufficient 
evidence of purchase and date of receipt, otherwise user’s rights under this warranty shall be deemed waived. 

PACE Incorporated

   

Pace Europe

 

255 Air Tool Drive 

 

11 Holdom Avenue 

Southern Pines,  

 

Bletchley, Milton Keynes, 

North Carolina, 28387   

United Kingdom, MK1 1QU 

Tel:  (877) 882-PACE   

Tel:  011 44 1908 277666 

Tel:  (910) 695-7223 

 

Fax: 011 44 1908 277777 

Fax: (910) 695-1594 

 

 

 

 

Summary of Contents for MBT250










Reviews: